Published Jul 18. 2021 - 2 months ago
Updated or edited Jul 24. 2021

DIY wooden landing net

Wooden landing nets might not seem like the easiest or least expensive DIY-project, but this article shows how to easily make one almost for free

If by any chance you read my previous post (IKEA Fly Tying Board: How to make a 10-dollar tying station based on a cheap IKEA cutting board. Published Nov 24. 2019), you know I have this "why buy one when I can make my own" mentality. I am not necessarily cheap; I just like to get my creative juices flowing every now and then…

A couple years ago my wife bought me a wooden landing net. Looking at it I thought I could make one, so I went to the local woodworking shop and shared my idea: create a simple mold, bend the wood to shape, sand and seal, make a basket and... voila!
Their input was less than constructive. The first thing they said was "you can't do that". Then, they proceeded to list all the items I needed to buy (from them of course): a wood steaming box, this and that tool, etc. at the tune of over one thousand dollars. I left the shop both upset and with my brain racing with ideas... I hate when people with limited creativity tells me I can't do something!
So, I got to work.

I gathered some wood that was sitting around the basement and my very rudimentary and limited selection of tools (a hand saw, a wood rasp, several clamps… and yes, my wife's tea kettle) and started creating my home-made landing net.

The profile and the steamed frame
Noé Tirado-Muñiz

I created a mold by drawing the desired form with pencil on a piece of plywood and placing nails along it to create the required contour. To bend the thin net frame made from pine wood trim into shape, I used a tea kettle to create steam, exposing the trim to it and gently coaxing it into shape. I tied the ends together and left it untouched for several days to help it retain the shape.


Clamping the handle
Noé Tirado-Muñiz

I then created the middle section of the handle by cutting the desired shape out of a piece of poplar and glued it to the pine frame. I used the remaining pieces of poplar as part of the clamping system to help retain the desired shape.


The frame with a groove
Noé Tirado-Muñiz

Once the glue dried, I cut the handle to shape, created a lengthwise groove on the net frame and drilled the necessary holes. I then sanded – and sanded, and sanded some more – and finally sealed it with polyurethane.


The finished net
Noé Tirado-Muñiz

I made a custom basket and attached it with fishing line so the weaving would not show.


The net at work
Noé Tirado-Muñiz

This is now my to-go landing net. I spent zero dollars on this project.


Comments

Thanks for a great article!...

Thanks for a great article! How did you create the lengthwise groove on the frame?

I first scored the wood with...

I first scored the wood with a chisel and then used a wood file of the appropriate size. I finished it (for cosmetic reasons) with sanding paper wrapped around a small piece of wood.

DIY wooden landing net...

Great looking net! Thanks for the 'How To'.

.

Log in or register to pre-fill name on comments, add videos, user pictures and more.
Read more about why you should register.
 

Since you got this far …


The GFF money box

… I have a small favor to ask.

Long story short

Support the Global FlyFisher through several different channels, including PayPal.

Long story longer

The Global FlyFisher has been online since the mid-90's and has been free to access for everybody since day one – and will stay free for as long as I run it.
But that doesn't mean that it's free to run.
It costs money to drive a large site like this.

See more details about what you can do to help in this blog post.